Design Details
A projector rack that can be wall-mounted to appear as if it's floating.
Its floating design allows for a slim installation that doesn't take up much space.
It can be mounted on the wall with plasterboard pins that don't leave noticeable holes.
You can install it in your preferred location without worrying about the arrangement of your furniture.
The projector can be easily attached with screws.
This is a projector rack with a design that blends seamlessly into your interior.
Details & Specs
Specs
| Size | W10×D23.8×H11cm |
|---|---|
| Internal Size | Mounting section: W5×D23.5×H1.5cm. Screw fixing section: W1.3×D19.5cm. |
| Available Size | The bottom of the projector should not have any obstructions such as protrusions higher than 1cm. The screw fixing part on the bottom of the projector should be less than 1cm in height and within 1.2cm in width. If there are terminal connection cords on the back: a gap of more than 10cm is required (the screw fixing part on the bottom from the back of the projector should be within 11.5cm). If there are no terminal connection cords on the back: the screw fixing part on the bottom from the back of the projector should fit within 2.5 to 21.5cm. |
| Weight | 475g |
| Material | Main body: Steel (powder coated) |
| Load Capacity | 3kg (This is the static load capacity when there is no impact.) |
| Origin | Designed in Japan,Made in China |
Assembly
| Assembly | Required |
|---|---|
| Accessories | Projector fixing screws (1/4 inch x 11.3mm & 1/4 inch x 18mm) x 1 each, Washers x 2, U-shaped parts x 1, Plasterboard pin set x 4, Wood screws x 4, Silicone seals x 3, Hex wrench |
| Additional Information | ■Suitable walls for installation: When using plasterboard pins: wallpaper, cloth wallpaper, vinyl wallpaper, plasterboard, thin veneer. When using wood screws: pillars, wooden walls, printed plywood (where there are horizontal studs on the back). ■Before purchasing, please read the projector compatibility carefully and ensure that your projector is compatible. ■The position and distance for installation should be determined by referring to your projector's instruction manual. ■Compatible projectors: ●The bottom fixing screw should be a single hole type and compatible with a 1/4 inch screw. (Please do not use stop screw conversion adapters etc.) ●If you are mounting it sideways, please check if your projector supports horizontal keystone correction. ●The weight of the projector should be 3kg or less. |
smart
Smart Wall-Mounted Projector Stand
¥3,100 JPY
/
A projector rack that can be wall-mounted to appear as if it's floating.
A projector rack that can be installed floating on the wall! You can mount it at your preferred position without worrying about the arrangement. It can be attached to the wall with plasterboard pins that do not leave noticeable holes.
Smart Wall-Mounted Projector Stand
¥3,100 JPY
/
Smart Wall-Mounted Projector Stand
¥3,100 JPY
/
Details & Specs
Specs
| Size | W10×D23.8×H11cm |
|---|---|
| Internal Size | Mounting section: W5×D23.5×H1.5cm. Screw fixing section: W1.3×D19.5cm. |
| Available Size | The bottom of the projector should not have any obstructions such as protrusions higher than 1cm. The screw fixing part on the bottom of the projector should be less than 1cm in height and within 1.2cm in width. If there are terminal connection cords on the back: a gap of more than 10cm is required (the screw fixing part on the bottom from the back of the projector should be within 11.5cm). If there are no terminal connection cords on the back: the screw fixing part on the bottom from the back of the projector should fit within 2.5 to 21.5cm. |
| Weight | 475g |
| Material | Main body: Steel (powder coated) |
| Load Capacity | 3kg (This is the static load capacity when there is no impact.) |
| Origin | Designed in Japan,Made in China |
Assembly
| Assembly | Required |
|---|---|
| Accessories | Projector fixing screws (1/4 inch x 11.3mm & 1/4 inch x 18mm) x 1 each, Washers x 2, U-shaped parts x 1, Plasterboard pin set x 4, Wood screws x 4, Silicone seals x 3, Hex wrench |
| Additional Information | ■Suitable walls for installation: When using plasterboard pins: wallpaper, cloth wallpaper, vinyl wallpaper, plasterboard, thin veneer. When using wood screws: pillars, wooden walls, printed plywood (where there are horizontal studs on the back). ■Before purchasing, please read the projector compatibility carefully and ensure that your projector is compatible. ■The position and distance for installation should be determined by referring to your projector's instruction manual. ■Compatible projectors: ●The bottom fixing screw should be a single hole type and compatible with a 1/4 inch screw. (Please do not use stop screw conversion adapters etc.) ●If you are mounting it sideways, please check if your projector supports horizontal keystone correction. ●The weight of the projector should be 3kg or less. |
